Does your car feel vague or unresponsive in corners?
Front Engine Torque Arm Upgrade
KDT975The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel.
Whiteline's torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology, this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.
SuperPro Handling Package
VAG-MK72WD-KITFront and Rear Suspension Bush Kit (For normal road use)
KIT5360KFront Roll Centre / Bump Steer Correction Kit
KCA472IMPORTANT - Check clearance with aftermarket rotors
Front Control Arm Bush Kit
Standard Alignment
KIT5360CAKCaster Increase
KIT5360CADJKComplete Lower Control Arm Kit
Steel Standard Alignment
TRC1070OEM Part Number: 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A
Quantity required: 1
Out of Stock
Contact us for availability.
Wheel-alignment required after fitment
Steel Performance Alignment
TRC1071OEM Part Number: 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A
Quantity required: 1
Out of Stock
Contact us for availability.
Wheel-alignment required after fitment
Lightweight Alloy Adjustable with DuroBall
ALOY0018KThese enhancements are the optimal settings over standard to produce a better handling vehicle.
SuperPro has stringently tested these control arms on the Golf 7 GTi, R and Audi A3 RS3 in both standard configuration and with lowered springs.
The sub frame in these vehicles has no positive location and there is a lot of movement allowable in the bolt holes. Therefore, it is critical that sub frame is not misaligned during re-installation. For this reason and for proper clearance it is critical the sub frame be in the most rearward position when torqued up. These arms have not been tested with any aftermarket engine mount packages that may cause a sub frame misalignment and care must be taken.
The recommended lowered front centre of the wheel is 330mm. See fitting instruction for more
Quantity required: 1
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Arms
Wheel-alignment required after fitment
Control Arm Lower Front Bush Kit
SPF4175KOEM Part Number: 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A
Quantity required: 1
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
Control Arm Lower Rear Bush Kit
Standard Alignment
SPF4176KOEM Part Number: 5Q0407183C, 5Q0407183D, 5Q0407183E, 5Q0407183G, 5Q0407183J
Quantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes
Steering-Pull Correction Kit
SPF4177K1 degree caster adjustment available
Suits vehicles with Vertical Control Lower Arm Rear Mounting Bolt
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Quantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes
Performance Alignment Kit
SPF4178KSuits vehicles with Vertical Control Lower Arm Rear Mounting Bolt
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
Quantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes
Extra Camber Strut Mounts
TRC500024mm Heavy Duty 2 Position Blade Adjustable Anti-Roll Bar and Link Kit
RC0033FZ-24KITQuantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 1 x Anti-Roll Bar, 2 x Brackets, 2 x Polyurethane Bushes, 2 x Links
Wheel-alignment required after fitment
24mm Heavy Duty 2 Position Blade Adjustable Anti-Roll Bar
RC0033FZ-24Quantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 1 x Anti-Roll Bar, 2 x Brackets, 2 x Polyurethane Bushes
Wheel-alignment required after fitment
Anti-Roll Bar Link Kit - Heavy Duty Adjustable
TRC4301Quantity required: 1
Only 4 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Links
Rear Suspension Bush Kit (For normal road use)
KIT5360RKControl Arm Lower-Inner Front Bush Kit
SPF3350KQuantity required: 1
In Stock
For immediate despatch.
Kit Includes: 2 x Steel Tubes, 2 x Sleeves, 2 x Polyurethane Bushes
Wheel-alignment required after fitment
Control Arm Lower-Front Outer Bush Kit
SPF4180KQuantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
Control Arm Lower-Inner Bush Kit
Standard and Fast Road
SPF4181KQuantity required: 1
In Stock
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
High-Performance Version
SPF4181-90KQuantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
Control Arm Lower-Outer Bush Kit
SPF4426KQuantity required: 1
Only 3 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
Wheel-alignment required after fitment
Control Arm Upper-Inner Bush Kit
SPF4193KQuantity required: 1
Only 4 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
Wheel-alignment required after fitment
Control Arm Upper-Outer Bush Kit
SPF4194KQuantity required: 1
In Stock
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
Wheel-alignment required after fitment
Trailing Arm Bush Kit
SPF4195KQuantity required: 1
Next Stock Due 14 August 2024
Pre-order now be ensure you get yours.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
Anti-Roll Bar Bush Kit
To Suit OE 22mm Bar (most common)
SPF4183-22KQuantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 2 x Polyurethane Bushes
To Suit OE 23mm Bar
SPF4183-23KQuantity required: 1
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
To Suit OE 25mm Bar
SPF4183-25KQuantity required: 1
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
22mm Heavy Duty 2 Position Blade Adjustable Anti-Roll Bar & Link Kit
RC0033RZ-22KITQuantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes, 2 x Links
22mm Heavy Duty 2 Position Blade Adjustable Anti-Roll Bar
RC0033RZ-22Quantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes
Wheel-alignment required after fitment
Anti-Roll Bar Link Kit
TRC4300Quantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 2 x Links
Related News
- VAG MQB Standard and Offset Lower Control Arm Assembly Kits (Product News)
- SuperPro Overhauls an ageing SEAT Leon FR at Demon Tweeks (General News)